News

  • What’s International Standard Requirements For Plastic Molding Manufacturing

    What’s International Standard Requirements For Plastic Molding Manufacturing

    SWE Plastic Mould concluded 30 international standards for plastic molding manufacturing SWE molds to improve the quality of the mold, minimize the complaints about mold quality, hand over to the customer’s satisfactory mold, summarize and summarize the common problems of plastic injection ...
    Read more
  • Which two Parts does the Plastic Molded Part Components consist of?

    Which two Parts does the Plastic Molded Part Components consist of?

    Plastic Molded Parts is a processing method used in batch production of complex parts of certain shapes. The detailed principle refers to: the plastic raw material that is heated and ablated is pushed by the screw of the injection molding machine into the cavity of the plastic mold, and after coo...
    Read more
  • Plastic Part Design for Injection Molding is a problem to be aware of

    Plastic Part Design for Injection Molding is a problem to be aware of

    Plastic Part Injection Mould Design Molding needs to pay attention to the following issues: 1. The number and arrangement of cavities. When plastic Mold Design completes and selects the materials used, it is necessary to consider whether to use single cavity molds or multi-cavity molds. The numbe...
    Read more
  • The Basic Ingredients of China SWE Plastic Injection Moulding Parts

    The Basic Ingredients of China SWE Plastic Injection Moulding Parts

    The Basic Ingredients of ABS Plastic Molded China SWE Plastic Injection Moulding Parts In order to improve the performance of Plastic Parts Molded, various auxiliary materials such as fillers, plasticizers, lubricants, stabilizers, colorants and the like are added to the polymer to become a good ...
    Read more
  • What are the common problems with Injection Moulding Products

    What are the common problems with Injection Moulding Products

    What are the common problems with Custom Molded Injection Moulding Products 1.Produce a dent 2.Plastic Molded Products lack of material 3. Produce silver streaks 4. Deformation 5. Cracks appear 6. Generate stress cracking 7. There is a mesh crack 8. Whitening 9. Fused marks 10. Produce a smudge, ...
    Read more
  • Is your hotel using Commercial Spray Air Freshener Dispenser

    Is your hotel using Commercial Spray Air Freshener Dispenser

    Is your hotel using Commercial Spray Air Freshener Dispenser With the improvement of living standards, Electric Air freshener Commercial, which was only available in star-rated hotels, has entered the chain of hotels, baths, hospitals, shopping malls and even public toilets with smart Commercial ...
    Read more
  • How to use Battery Spray Electric Air Fresheners Dispenser

    How to use Battery Spray Electric Air Fresheners Dispenser

    How to use Battery Spray Electric Air Fresheners Dispenser 1.Determine the installation location: The bathroom Electric Air Freshener Machines is generally installed in the place where the toilet enters the door, and the position is not easy to be too low. The installation position should be such...
    Read more
  • Plastic Molds Process Speciality Require for Mold Plastic Process Equipment

    Plastic Molds Process Speciality Require for Mold Plastic Process Equipment

    The speciality of Plastic Molding processing requirements for Injection Plastic processing equipment Injection Plastic Mold has its own special characteristics. These specialities are mainly: 1. Most Plastic Injection Mold Maker needs to process complex surface curved surfaces on solid metal modu...
    Read more
  • Injection Make Plastic Molding Production Diversification

    Injection Make Plastic Molding Production Diversification

    SWE Plastic Injection Make Plastic Molding Production Diversification In Injection Plastics project, it is basically divided into static mode and dynamic mode. The sprue sleeve on the injection head side of the injection plastic mould machine is a static mold, and the static mold generally has a ...
    Read more
  • How to Maintain and Repair Injection Plastic Parts Molding

    How to Maintain and Repair Injection Plastic Parts Molding

    How to Maintain and Repair Injection Plastic Parts Molding-SWE Plastic Mold Compared with other Plastic Mould, Injection Plastic Molding has a more complex and precise structure, and requires higher operation and maintenance products. Therefore, in the whole production process, the use of positiv...
    Read more
  • How to determine the making parts line during molding manufacture

    How to determine the making parts line during molding manufacture

    Making Plastic Parts line is also called the parting line, mainly depends on the design requirements and appearance requirements of the product, and also considers whether the processing is feasible and the position of plastics mold to follow the glue. Plastic products will have obvious parting l...
    Read more
  • SWE Injection Plastic Mold Making You Must Grasp These Few

    SWE Injection Plastic Mold Making You Must Grasp These Few

    Plastic Mold Making You Must Grasp These Few The problems that plastic mold part design should pay attention to are: 1. The rubber inlet should be opened in the thick part of the product to ensure smooth and complete filling; 2. Try to open it at the edge or bottom witho...
    Read more
123 Next > >> Page 1 / 3